Commodity


Chapter
84 Chapter 84 - Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof

Sub Chapter
8402 Steam or other vapour generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); super-heated water boilers.

Sub Heading
840212 - - Watertube boilers with a steam production not exceeding 45 t per hour:

Code
84021211 - - - Electrically operated: - - - - Boilers with a steam production exceeding 15 t per hour

 

Tariffs


Displaying 1-3 of 3 result(s).
Country GroupGroup DescriptionActivityTariff RateUnitValid FromValid To
CD (MFN)Customs Duty (MFN)Import5kg01-09-201631-12-9999
VATValue Added TaxImport10kg01-01-201231-12-9999
ATIGASpecial Tariff for ASEAN Trade in Goods AgreementImport0kg01-01-201731-12-2017

 

Measures


Name Type Agency Description Comments Law Validity
Standard Certificate required for importing potentially dangerous goods Certificate Requirement Ministry of Industry and Trade The quality of products and goods in the list of group 2 products and goods as enclosed to this Circular shall be managed according to relevant national technical regulations and the Circular No. 48/2011/TT-BCT dated 30 December 2011 by Minister of Industry and Trade on quality management for group 2 products and goods within authority of the Ministry of Industry and Trade The quality of group 2 products and goods to which no national technical regulation exists shall be managed according to national standards or equivalent technical norms as defined in Column 3 in the Appendix of this Circular Specialist management shall be governed by documents in Column 5 in the Appendix of this Circular. The imported goods being the subjects of state inspection of quality only receive customs clearance after an inspecting agency issue a notification of the satisfactory result of the state inspection of imported goods quality. [Note: This measure is applicable for the list of potentially dangerous goods to be imported to Vietnam] Circular 48/2011/TT-BCT quality management of group 2 products and goods under the Ministry of Industry and Trade's management 31-12-9999

Procedures

Name Description Category View Procedure Detail with Relevant Forms
State Inspection for potentially dangerous goods State Inspection for potentially dangerous goods Procedure View

Measures


Name Type Agency Description Comments Law Validity
Import of loading and unloading equipments, boilers and pressure equipmenst for use in transportation requires certificate for design appraisal Technical Measures Ministry of Transport The design of the equipment, imported equipment, manufacture, assembly, conversion and utilization of transportation must be evaluated by Vietnam Registry Department and issue certificate of inspection and quality safety technical Pursuant to check the quality certificates of technical safety equipment and facility is regulations, technical standards, the provisions of relevant laws and standards equivalent provisions for ensuring safety and technical quality that corresponds to each type of equipment referred to in Annex I of the Circular 35/2011 / TT-BGTVT Circular 35/2011/TT-BGTVT Regulation on procedures for granting Certificate of technical safety quality of loading and unloading equipment, boilers, pressure equipment used in transport 31-12-9999

Procedures

Name Description Category View Procedure Detail with Relevant Forms
Issuance of certificate for design appraisal of loading and unloading equipments, boilers and pressure equipmenst imported for use in transportation Issuance of certificate for design appraisal of loading and unloading equipments, boilers and pressure equipmenst imported for use in transportation Procedure View

Measures


Name Type Agency Description Comments Law Validity
Import of loading and unloading equipments, boilers and pressure equipmenst use in transportation requires technical safety certificate Technical Measures Ministry of Transport The equipments have a full dossier as provided for in Article 6 of Circular 35/2011/TT-BGTVT must be tested to confirm the compatibility of the device with registration records Pursuant to check the quality certificates of technical safety equipment and facility is regulations, technical standards, the provisions of relevant laws and standards equivalent provisions for ensuring safety and technical quality that corresponds to each type of equipment referred to in Annex I of the Circular 35/2011 / TT-BGTVT Circular 35/2011/TT-BGTVT Regulation on procedures for granting Certificate of technical safety quality of loading and unloading equipment, boilers, pressure equipment used in transport 31-12-9999

Procedures

Name Description Category View Procedure Detail with Relevant Forms
Issuance of technical safety certificate for loading and unloading equipments, boilers and pressure equipmenst imported for use in transportation Issuance of technical safety certificate for loading and unloading equipments, boilers and pressure equipmenst imported for use in transportation Procedure View

Measures


Name Type Agency Description Comments Law Validity
The list of goods tobe quality inspected before clearance (category 2 products/goods under the Ministry of Transport) Inspection Requirement Ministry of Transport List of products and goods likely to be unsafe (below referred to as list of group-2 products and goods) subject to the state management by the Ministry of Transport specified at Point c. Clause 2. Article 32 of the Government's Decree No. 132/2008/ND-CP of December 31, 2008 The quality of products and goods on the list of group-2 products and goods subject to the state management by the Ministry of Transport provided in the Appendix to this Circular shall be managed on the principle that these products and goods, before being marketed or put into operation or use. must be certified and announced or tested to be conformable with relevant national technical regulations on quality management promulgated by the Ministry of Transport, as stipulated in Circular 63/2011/TT-BGTVT Circular 39/2016 / TT-BGTVT regulates the list of potentially unsafe products and goods under the management of Ministry of Transport 15-09-2018

Measures


Name Type Agency Description Comments Law Validity
The list of goods subject to specialized inspection measures before clearance (Group 2 products/goods under the management of the Ministry of Industry and Trade) Technical Measures Ministry of Industry and Trade List of potentially unsafe products and goods within authority of the Ministry of Industry and Trade (hereinafter referred to as the List of Group 2 products and goods). Goods/products under Group 2 shall be subject to specialized inspection measures from relevant ministries before customs clearance upon their export/import. The quality of products and goods in the list of group 2 as specified in Circular No. 29/2016/TT-BTC dated 13 December 2016 shall be managed according to relevant national technical regulations and the Circular No. 48/2011/TT-BTC dated 30 December 2011 by Minister of Industry and Trade on quality management for group 2 products and goods within authority of the Ministry of Industry and Trade. Circular No. 29/2016/TT-BCT dated December 13, 2016 of the Ministry of Industry and Trade amending and supplementing a number of articles of Circular No. 41/2015/TT-BCT prescribing the list of potentially unsafe products and goods 31-12-9999

Measures


Name Type Agency Description Comments Law Validity
The list of exported and imported goods have specialized inspection before clearance SPS Measures Ministry of Industry and Trade The list of exported and imported goods to be inspected in quality control, technical regulations, food safety before clearance under the management responsibility of the Ministry of Industry and Trade in the Annex of Decision 11039/QD-BCT The list of exported and imported goods to be inspected in quality control, technical regulations, food safety before clearance under the management responsibility of the Ministry of Industry and Trade in the Annex of Decision 11039/QD-BCT Decision 4755/QD-BCT of 2017 announcing the list of imported products subject to inspection of quality assurance, technical regulations and food safety before clearance under the management of the Ministry of Industry and Trade 01-01-2018

Measures


Name Type Agency Description Comments Law Validity
Quality management of likely unsafe products and goods (below referred to as group-2 products and goods) under the Ministry of Industry and Trade’s management Technical Measures Ministry of Industry and Trade Imported group-2 goods must be quality examined upon importation under Article 21 of this Circular Imported of group-2 goods subject to technical regulations regarding the conditions for manufacture of such products or goods shall additionally provide certificates related to the manufacture conditions issued by a designated or recognized certification organization Circular 48/2011/TT-BCT quality management of group 2 products and goods under the Ministry of Industry and Trade's management 31-12-9999

Procedures

Name Description Category View Procedure Detail with Relevant Forms
Order, procedures and contents of quality examination of imported group-2 goods Quality management of likely unsafe products and goods (below referred to as group-2 products and goods) under the Ministry of Industry and Trade’s management Procedure View

Measures


Name Type Agency Description Comments Law Validity
List of group-2 products and goods falling under the state management responsibility of the Ministry of Labor Technical Measures Ministry of Labour - Invalids and Social Affairs List of group-2 products and goods falling under the state management responsibility of the Ministry of Labor, War Invalids and Social Affairs specified at Point f, Clause 2, Article 32 of Decree No. 132/2008/ND-CP, including machinery and equipment subject to strict labor safety requirements, public recreation facilities and personal protection equipment which are likely to become unsafe in the use process Contents and order of and procedures for state quality inspection of products and goods on the list of group-2 products and goods in production is stipulated in Circular 03/2010/TT-BLĐTBXH Circular 03/2010/TT-BLDTBXH of January 19, 2010, promulgating a list of group-2 products and goods and guiding the order of, procedures for, and contents of, quality inspection of products and goods in production 31-12-9999