| Name | Import of used machinery, Equipment and Technological lines |
|---|---|
| Description | Enterprises import used machinery, equipment and technological lines; used parts and components have to inspected as stipulated in circular 23/2015/TT-BKHCN |
| Comments | It is prohibited to import any used equipment that has been discarded/banned by other countries because of its obsolescence, low quality, or causing environmental pollution as published by the Ministry of Science and Technology on its web portal |
| Validity From | 01-07-2016 |
| Validity To | 31-12-9999 |
| Reference | |
| Technical Code | |
| Agency | Ministry of Science and Technology |
| Created Date | 2016-08-14 12:09:22 |
| Updated Date | 2016-11-28 13:39:14 |
| Status | Active |
| Measure Type | Technical Measures |
| Legal/Regulation | Circular 23/2015/TT-BKHCN on import of used machinery, equipment and technological lines |
| Un Code | B84 - Inspection requirement |
| Procedure Name | Description | Category | View Procedure Detail with Relevant Forms |
|---|---|---|---|
| No results found. | |||
This measure applies to commodity/s
| HS Code | Description |
|---|---|
| 84134000 | - Concrete pumps |
| 84135030 | - - Water pumps, with a flow rate not exceeding 8,000 m3/h |
| 84135040 | - - Water pumps, with a flow rate exceeding 8,000 m3/h but not exceeding 13,000 m3/h |
| 84135090 | - - Other |
| 84136030 | - - Water pumps, with a flow rate not exceeding 8,000 m3/h |
| 84136040 | - - Water pumps, with a flow rate exceeding 8,000 m3/h but not exceeding 13,000 m3/h |
| 84136090 | - - Other |
| 84137011 | - - Single stage, single suction horizontal shaft water pumps suitable for belt drive or direct coupling, other than pumps with shafts common with the prime mover: - - - With an inlet diameter not exceeding 200 mm |
| 84137019 | - - Single stage, single suction horizontal shaft water pumps suitable for belt drive or direct coupling, other than pumps with shafts common with the prime mover: - - - Other |
| 84137031 | - - Submersible water pumps: - - - With an inlet diameter not exceeding 200 mm |
|
A Quick Intro |
Search Trade Information
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Feature Information
|
|
|
|
|
|
|
|
|
|
|
Information & Articles
|
|
|
|
|
|
|
|
|
|
|
|
Contact Us! If you cannot find what you require in this website please feel free to contact us. Click here to send us a message >>>
|